Why won't my Funkwerk Automobile Accessories EGO LOOK switch on?
Your Funkwerk EGO LOOK might not be switching on due to a few reasons. First, there may be no supply voltage, so check the fuse and replace it if necessary, and also check the cable and connections. Another possibility is that the ignition isn't switched on, so ensure that it is. Finally, the ignition line might be interrupted; in this case, check the line and the 1A fuse.
What to do if my phone cannot find the Funkwerk Automobile Accessories EGO LOOK during coupling?
If your mobile phone can't find the Funkwerk EGO LOOK during coupling, it might be because the EGO LOOK is already coupled with another device. Try canceling the existing connection and then attempt the coupling process again.
What to do if after switching on the ignition, the connection to the coupled mobile phone is not produced with Funkwerk Automobile Accessories?
If the connection to your coupled mobile phone isn't established after switching on the ignition with your Funkwerk Automobile Accessories device, there could be several reasons. Ensure your mobile phone is within range of the EGO LOOK. Also, check that the Bluetooth interface is activated on your mobile phone and is set to "On" (the "Automatic" option might not be sufficient). It's also possible that your mobile phone requires confirmation of the connection setup; confirm the connection on your phone or deactivate the security prompt in your phone's settings. Lastly, one of the devices may no longer have a valid link key. In this case, delete the other device from both devices’ lists of coupled devices and perform a new coupling.
Why does the person I'm talking to complain of echoes when using Funkwerk Automobile Accessories?
If the person you're speaking with complains of echoes while using your Funkwerk Automobile Accessories, it could be due to too little space between the microphone and speaker; try increasing the distance or decreasing the volume. Alternatively, the volume might be too high; try reducing it.
Why does the person I'm talking to on my Funkwerk Automobile Accessories say the sound is fuzzy or scratchy?
If the sound is fuzzy or scratchy when using your Funkwerk Automobile Accessories, it's likely due to a poor Bluetooth connection. Try reducing the distance between your mobile phone and the EGO LOOK or removing any metallic obstructions that may be interfering with the signal.
Why can't the person I am talking to hear me when using Funkwerk Automobile Accessories?
If the person you're speaking with can't hear you when using Funkwerk Automobile Accessories, the microphone may not be plugged in. Connect the microphone to the electronics box. If the cable is defective, replacement is necessary.
Why does the person I am having a phone conversation with complain of interference when using Funkwerk Automobile Accessories?
If the person you're speaking with complains of interference while using your Funkwerk Automobile Accessories, it might be because air is flowing across the microphone. Try mounting the microphone in another place or reduce air flow if needed. Another possibility is that the mobile phone is very close to parts of the EGO LOOK or the car radio. Increase the distance between your mobile phone and the EGO LOOK or radio.
Welcomes the user and highlights the EGO LOOK's combination of functionality and design.
Details critical safety considerations and risks associated with installation and use.
Lists all components included in the EGO LOOK package, including the electronics box and accessories.
Details prerequisites for installation, including vehicle requirements and phone compatibility.
Specifies Bluetooth® phone compatibility and radio muting function setup.
Describes how to integrate the EGO LOOK with pre-installed Funkwerk hands-free systems.
Covers connecting to car speakers and audio systems, including power handling limits.
Provides guidance on selecting suitable and unsuitable locations for EGO LOOK components.
Details the procedure for securely mounting the electronics box and microphone.
Covers attaching the radio controller and display using adhesive pads.
Details the process of connecting the ISO cable, including verification steps.
Explains how to connect the microphone, line-in devices, and display to the electronics box.
Highlights the capabilities of the EGO LOOK system, including Bluetooth® functions and call management.
Explains the functions of the rotary knob, red button, and green button on the EGO LOOK controller.
Covers initial setup, including battery type, insertion, removal, and controller activation.
Defines various symbols displayed on the status bar and their meanings.
Lists and explains symbols used for text input, character selection, and confirmation.
Illustrates symbols for menu options and different types of phone numbers.
Explains how to use the speller for entering numbers, names, and text.
Guides on initial use, Bluetooth® technology, activating the controller, and managing power.
Describes how to navigate through the EGO LOOK menus using the rotary knob.
Details managing up to 10 user profiles, including settings like initials, ringtone, and call lists.
Explains how to make and receive calls, including handling incoming calls and call waiting.
Covers reading, searching, and synchronizing phone contacts and viewing call history.
Describes voicemail operations and sending/receiving text messages.
Explains music playback via Bluetooth® and recording voice memos.
Details various system settings like ring tone, brightness, call settings, and display rotation.
Explains how to use voice commands for dialing and managing calls.
Details how to update the EGO LOOK software via Bluetooth® and where to find instructions.
Provides answers to common queries regarding EGO LOOK functionality, compatibility, and purchasing.
Lists optional accessories like the Stereo Mute Box and charging cradle.
Identifies key replacement components of the EGO LOOK system.
Lists dimensions, operating voltage, and current consumption of the EGO LOOK.
Details supported interfaces and Bluetooth® profiles for connectivity.
States compliance with EU R&TTE Directive 1999/5/EC.
Details compliance with FCC/IC regulations and RF exposure limits.
Provides hotline phone numbers, fax, and email for support inquiries.
General| Bluetooth | Yes |
|---|---|
| Display | LCD |
| Adjustable | Yes |
| Color | Black |
| Mounting Type | Clip |
To Next Page
