40
|
41
being couple to the EGO LOOK. In order to play back music, the EGO LOOK must be coupled to an A2DP-capable device
(such as a mobile phone with A2DP, an iPod™ or an MP3-Player with A2DP adapter).
Connection / coupling
Under the “Option” menu item, a “New device” may be coupled, or an already coupled device may be connected. A total
of 10 devices may be coupled, whereas only one device may be active. If a “New device” is selected, a Bluetooth
®
device
search is performed. The desired device can be selected from there.
If the music device does not support coupling from other devices, it is also possible to couple the EGO LOOK from the
music device via the “Couple from device” menu item. In both cases, a four-digit PIN code is displayed by the EGO LOOK,
which must be entered into the music device. Is the PIN is incorrect, the menu jumps back to device selection, and you
must repeat the process.
If an iPod™ or MP3 player with an A2DP adapter is used, these devices couple automatically with the EGO LOOK. For
this, the “Couple from device” menu item must be selected during the search for devices. After coupling, all playback
functions are available to the user.
Playback
The following functions are available for playback and are shown in the display:
→ Play
→ Pause
→ Stop
→ Forwards (by title)
→ Reverse (by title)
→ Volume setting (playback volume adjustable in 10 steps)
Return to the symbols using the rotary knob. For a description of these keys, please see the “Symbols” chapter.
To Next Page
Loading...
Need help?
General
