EGO LOOK
Power down
The current Bluetooth
®
connection is severed under this item and the EGO LOOK is switched off. The EGO LOOK may be
switched back on by pressing a single key.
7.8 Voice control
The dialogue-guided voice control of the EGO LOOK allows you to select a name or number via voice input. While
numerical selection allows you to directly announce a number, you also have the option to select the name directly from
the contacts list.
Switching the recognized language
Depending on the country version of your EGO LOOK, the voice recognition system supports up to three languages.
One of these may be activated. To change the active recognized language, select the item „Setting → Voice control
→ Recognized language“ in the menu. A list of available languages is now displayed. Select the desired language and
confirm by pressing the rotary knob. The EGO LOOK will now save your settings and begin updating the recognized
language. The status of this process is displayed for you using a progress bar.
Activation and sequence
Voice control is only possible if you are not making a telephone call. By pressing the rotary knob for longer than a half
a second while not engaged in a telephone call, the status text „Main menu“ is heard, and the message „Please speak“
appears in the display.
You may cancel each voice dialogue at almost any time with another prolonged pressing of the key. If the EGO
LOOK is waiting for a voice command, you may end the dialogue by saying “abort”.
If there is no Bluetooth
®
phone connected to the EGO LOOK, voice-activated dialing cannot be activated.
To Next Page
Loading...
Need help?
General
