EGO LOOK
7. 5 Sp el le r
The controller controls the EGO LOOK using the rotary knob. In addition, the rotary knob is used for confi rmation. The
button is used to go one step back or to exit the menu. The Speller allows you to compose telephone numbers
from individual digits or names from individual letters. It is available for various functions of the EGO LOOK, for example,
for dialing a telephone number or for creating a contact list entry. Operating the Speller is explained in the following:
→ Entering numbers
By rotating the rotary knob, navigate to a digit and accept this digit by pressing the rotary knob. You can delete
the last digit of the number by selecting the symbol. Once the number has been completely entered, you
can confi rm it by selecting the symbol. To cancel the process at any time, press the button.
→ Entering names or text
Similar to the method used for entering numbers, you can enter names or even entire texts using the Speller.
Navigate to a character by rotating the rotary knob and accept it by pressing the rotary knob. You can delete the
last character by selecting the symbol. Once the name has been completely entered, you can save it by
selecting the symbol. To cancel the process at any time, press the button. You can switch between
upper-case letters, lower-case letters, numbers and special characters using the symbols described in Chapter
7.2.3. You select these symbols using the rotary knob.
7.6 Getting started
Take enough time to familiarize yourself with the use of the EGO LOOK in combination with your mobile phone. First of
all, make a few calls to determine the ideal volume and the best voice pickup direction before using the EGO LOOK in
traffi c.
When getting started, your car should be parked in a quiet place. It is also helpful if the person you will be calling can
take time to let you make some test calls.
To Next Page
Loading...
