System bintec User’s Guide
13
Submenu Schedule & Monitor
4
4 Submenu Schedule & Monitor
The fields of the SCHEDULE & MONITOR submenu are described below.
The SCHEDULE & MONITOR menu offers access to other submenus:
■ KEEPALIVE MONITORING (HOSTS & IFC)
■ E
VENT SCHEDULER (TIME & SNMP)
4.1 Submenu Keepalive Monitoring
(Hosts & Ifc)
The SYSTEM ➜ SCHEDULE & MONITOR ➜ KEEPALIVE MONITORING menu contains
settings for the "Keepalive Monitoring" feature.
Keepalive Monitoring cannot be configured in the gateway for WAN partners
that are authenticated via a RADIUS server!
SYSTEM ➜ SCHEDULE & MONITOR ➜ KEEPALIVE MONITORING lists the hosts and
interfaces monitored by Keepalive Monitoring. The reachability of the hosts is
listed under
STATE: alive if the host was reachable on the last check, down if the
host was not reachable.
The WHAT TO MONITOR: menu is used to set whether the configuration is made
for
hosts or interfaces.
To Next Page
Loading...
Need help?
General
