Funkwerk bintec R230a User Manual

4
26
bintec User’s Guide System
Submenu Schedule & Monitor
Table 4-3: SYSTEM ➜ SCHEDULE & MONITOR ➜ EVENT SCHEDULER (TIME & SNMP) ➜
SCHEDULE EVENTS ➜ ADD/EDIT
4.2.2 Configuration of the Action (Command)
The SCHEDULE COMMANDS menu is described below.
The SYSTEM ➜ SCHEDULE & MONITOR ➜ EVENT SCHEDULER (TIME & SNMP) ➜
S
CHEDULE COMMANDS menu displays a list of all already configured actions.
Entries are added or modified in the SYSTEM ➜ SCHEDULE & MONITOR ➜ EVENT
SCHEDULER (TIME & SNMP) ➜ SCHEDULE COMMANDS ➜ ADD/EDIT menu.
Status This field cannot be edited and shows the sta-
tus of the trigger.
Possible values:
■ error - An error has occurred; the configura-
tion of the trigger is not consistent.
■ notavail - The status cannot be determined,
e.g. if the scheduler has not yet been acti-
vated (default value).
Possible values for TYPE = time:
■ active - The trigger is currently active.
■ inactive - The trigger is inactive.
Field Description

Funkwerk bintec R230a Specifications

General

Brand	Funkwerk
Model	bintec R230a
Category	Gateway
Language	English