Funkwerk bintec R230a User Manual

System bintec User’s Guide
21
Submenu Schedule & Monitor
4
The menu contains the following fields depending on the setting:
Field Description
Index The gateway assigns an index number for the
entry automatically. This value can also be
edited. The index defines the order of display in
SYSTEM ➜ SCHEDULE & MONITOR ➜ EVENT
S
CHEDULER (TIME & SNMP) ➜ SCHEDULE
E
VENTS.
It should be unique.
Possible settings: 1 to 65535.
Description Here you enter the desired description for the
event. The maximum length of the entry is 30
characters.
NextIndex Here you select from the existing entries the
entry that is to follow the current entry in an
event chain if applicable. The entries in an
event chain form a complex condition for an
action to be executed. How the event chain
leads to an action is configured in the
SYSTEM ➜
SCHEDULE & MONITOR ➜ EVENT SCHEDULER
(T
IME & SNMP) ➜ SCHEDULE COMMANDS menu.
Type Here you select the type of event:
Possible settings:
■ time - The action is initiated time dependent
(default value).
Please make sure the gateway system time
is set correctly!
■ value - The action is initiated depending on
a MIB variable.

Funkwerk bintec R230a Specifications

General

Brand	Funkwerk
Model	bintec R230a
Category	Gateway
Language	English