4
22
bintec User’s Guide System
Submenu Schedule & Monitor
Monitored event Only for TYPE = value.
Here you can choose between different events.
Possible settings:
■ user defined - The event is defined depend-
ing on the value of a specific MIB variable
(default value).
■ WAN interface total charge - The event is
defined depending on the fees summed up
for an ISDN interface.
■ WAN interface total duration - The event is
defined depending on the total connection
duration of a ppp interface.
■ WAN interface total RX traffic - The event is
defined depending on the total received
data volumn of a ppp interface.
■ WAN interface total TX traffic - The event is
defined depending on the total sent data
volumn of a ppp interface.
Table Only for MONITORED EVENT = user defined.
Here you enter the name of the MIB table con-
taining the MIB variable that is to be used for
the trigger, e.g.
BIBOPPPSTATTABLE.
Variable Only for MONITORED EVENT = user defined.
Here you enter the name of the MIB variable
that is to be used for the trigger, e.g.
TOTALDURATION.
Field Description
To Next Page
Loading...
Need help?
General
