4
30
bintec User’s Guide System
Submenu Schedule & Monitor
Table Only for EXECUTE COMMAND = user defined.
Here you enter the name of the MIB table con-
taining the variable to be set, e.g. ifTable.
Variable Only for EXECUTE COMMAND = user defined.
Here you enter the name of the MIB variable to
be set, e.g.
AdminStatus.
Index variable Only for EXECUTE COMMAND = user defined.
Here you enter the name of the MIB variable in
TABLE that is to be used as "index" to clearly
define one specific data record in the table, e.g.
Index.
The combination of INDEX VARIABLE and INDEX
VALUE defines the specific table entry.
Index value Only for EXECUTE COMMAND = user defined.
Here you enter the value of the INDEX VARIABLE
that clearly defines the data record that con
-
tains the required trigger variable, e.g. 10001
for INDEX.
Set value active Only for EXECUTE COMMAND = user defined.
Here you enter the value the VARIABLE is to be
assigned when the action is active.
value inactive Only for EXECUTE COMMAND = user defined.
Here you enter the value the VARIABLE is to be
assigned when the action is inactive.
Field Description
To Next Page
