Furukawa F2 - User Manual

F(S)-F105E
(
F1, F2, F3, F4, F5
)
INSTRUCTION MANUAL

Summary

Introduction

Warning and Hazard Communication

Hazard Classification System

Explains DANGER, WARNING, CAUTION, and NOTICE symbols for hazard identification.

Machine Overview and Initial Use

Specified Applications and Running-in

Lists intended uses and guides initial operation for longevity.

Core Safety Guidelines

Operator Responsibilities and Site Safety

Emphasizes understanding manuals, following instructions, and safe site practices.

Personal Protection and Hazard Avoidance

Details necessary PPE, fire safety, and avoiding common hazards.

Machine Stability and Start-up Procedures

Covers ground stability, operator seat, and engine start-up.

Critical Hazard Awareness (High Voltage, Utilities)

Addresses electrocution, underground utilities, and other severe risks.

Component Identification and Specifications

Key Component Functions and Dimensions

Explains major parts and provides dimensional data for breakers and rods.

Mounting and Removal Procedures

Attaching and Detaching the Breaker

Step-by-step guides for mounting and removing the hydraulic breaker.

Breaking Operation Best Practices

Pre-Operation Checks and Operation Rules

Essential checks, warm-up, and critical rules for effective breaking.

Optimal Thrust and Safe Handling

Techniques for applying correct force, direction, and safe handling during breaking.

Troubleshooting and Maintenance

Problem Diagnosis and Solutions

Guide to identify and correct common problems and their causes.

Hydraulic Oil Management and Inspections

Recommendations for choosing, managing oil, and performing inspections.

Wear Limits and Component Replacement

Specifications for wear limits and procedures for replacing key parts.

Accumulator and Adjuster Service

N2 Gas Charging and Adjuster Adjustment

Procedures for charging the accumulator and adjusting the breaker's valve adjuster.

Furukawa F2 Specifications