Safety precautions
1 – 21
n
nn
n Handle nitrogen gas carefully.
• Relieve gas from the accumulator before removing
The accumulator has been enclosed with high pressure gas, if removing the accumulator without
relieving gas from it, the accumulator cover and other parts can blow up and cause serious
injuries.
Before removing the accumulator, make sure to relieve gas from the accumulator.
• Use nitrogen gas to charge the accumulator
Using a different gas instead of nitrogen gas can cause an explosion.
Be sure to use nitrogen gas only when charging the accumulator.
• Handle the accumulator with care
If the accumulator explodes, serious accidents can result from it, because the accumulator has
been enclosed with high pressure gas.
Keep flammables away from the accumulator and always handle it with care.
Recharge the accumulator with correct pressure recommended by manufacturer of your particular
machine.
• Handle nitrogen gas cylinders with care
If a nitrogen gas cylinder explodes, serious accidents can result from it, because the nitrogen gas
cylinder has been enclosed with high pressure gas.
Keep flammable away from nitrogen gas cylinders and always handle them with care.
• Check bolts and other fittings before enclosing gas
Enclosing gas to a nitrogen gas cylinder without installed bolts or other fittings securely can cause
to blow out parts by gas pressure and serious injury or death can result from it.
Check bolts and other fittings before enclosing gas.
To Next Page
Loading...