Safety precautions
1 – 23
n
nn
n Check the machine after the maintenance
• After maintenance, run the engine at low idle and check for oil and water leakage areas where
the maintenance was performed.
• Move the operating levers slowly to check their functions.
• Increase the engine speed and check again for oil and water leakage.
• Move each operating lever normally to check their functions.
• Run the engine of the hydraulic breaker with a regular setting speed and check for oil leakage,
hydraulic oil, gas pressure and number of impact.
n
nn
n Store the hydraulic breaker safely
• The hydraulic breaker can fall and cause serious injury if not properly shelved.
• Store them securely.
• Don't let unauthorized personal or children enter the storage room.
n
nn
n Dispose of waste
• Disposal of waste can cause environmental pollution.
• Never dump waste on the ground, rivers or ponds.
When waste is drained from the machine, use a container to collect the waste.
• Follow local, States or Federal regulations to dispose of refuse oils, fuels, cooling water, coolants,
brake oils, solvents, filters, batteries and other potentially harmful waste.
To Next Page
Loading...