Furuno DFF-3D - Technical Specifications

FURUNO DFF-3D
SP - 1 E1352S01C
161124
SPECIFICATIONS OF MULTI BEAM SONAR
DFF-3D
1 GENERAL
1.1 TX frequency 165 kHz
1.2 Output power 800 W nominal
1.3 Amplifier type Straight amplifier (H/L gain sampling simultaneously)
1.4 Minimum range 3 m
1.5 Display mode Multi-sounder, Side scan, Section, 3D history
1.6 Depth range and Pulse repetition rate (PRR) (TX rate: 20, Pulse length: standard)
Range (m) PRR (times/min, max.)
5 600
10 600
40 484
100 200
200 100
500 40
1200 37
2 INTERFACE
2.1 Number of port
LAN 1 port, Ethernet 10/100Base-TX
External KP 1 port (optional external KP kit required)
3 POWER SUPPLY
3.1 Multi beam sonar 12-24 VDC: 1.4-0.7 A
3.2 Rectifier (PR-62, option) 100/110/220/230 VAC, 1 phase, 50/60Hz
4 ENVIRONMENTAL CONDITIONS
4.1 Ambient temperature
Main unit -15°C to +55°C
Transducer -5°C to +35°C
4.2 Relative humidity 93% or less at +40°C
4.3 Degree of protection IP55
4.4 Vibration IEC 60945 Ed.4
5 UNIT COLOR
N2.5 (fixed)