Note 1: Do not mix SEATENDER 20 with SEA GRANDPRIX 660HS, or apply one over the other.
Note 2: It is possible to remove SEATENDER 20 and replace the coating with SEA GRANDPRIX
660HS. To remove the current coating, soak a nylon-based scrubbing pad in thinners, then apply the
thinner to the coating in a washing motion. To prevent damage to the transducer, do not use tools
(scrapers, etc) or sandpaper to remove the coating.
SEATENDER 20 (no other paint allowed) anticorrosion paint.
To Next Page
Loading...
Need help?
General
