Furuno FAR-28x7 Series - Past Position Display Attributes

4. AIS OPERATION
4-13
[AIS SYMBOL]
1 BACK
2 AIS SYMBOL COLOR
RED/GRN/BLU/YEL/
CYA/MAG/WHT
3 AIS SYMBOL SIZE
SMALL/STD/LARGE
4 ROT TAG LIMIT
000.1°/min
5 PAST POSN COLOR
RED/GRN/BLU/YEL/
CYA/MAG/WHT
6 PAST POSN POINTS
5/10
4.9.2 Past position display attributes
You may choose the number of past position points to show per plot interval and
the color of past position points.
1. Roll the trackball to choose the MENU box and then push the left button.
2. Roll the wheel to choose 4 ARP•AIS and then push the wheel or the left
button.
3. Roll the wheel to choose 7 [AIS SYMBOL] and then push the wheel or the
left button.
AIS SYMBOL menu
4. Roll the wheel to choose 5 PAST POSN COLOR and then push the wheel or
the left button.
5. Roll the wheel to choose color desired and then push the wheel or the left
button.
6. Roll the wheel to choose 6 PAST POSN POINTS and then push the wheel or
the left button.
7. Roll the wheel to choose 5 or 10 as appropriate and then push the wheel or
the left button.
8. Push the right button three times to close the menu.