1. OPERATION
25
[Temp Source]: Select the source for the wa-
ter temperature indication: Select [Own] to
use the water temperature data from the wa-
ter temperature sensor connected to this unit,
or [NMEA] to use the water temperature data
from a navigator.
[Speed Source]: Select the source for speed.
Select [Own] to use the speed data from the
speed sensor connected to this unit, or
[NMEA] to use the speed data from a naviga-
tor.
[Trip Reset]: Select [Yes] to reset the trip dis-
tance to zero. Two beeps sound after the
completion.
To Next Page
