Furuno felcom15 - I;F Box IC-312 (for FELCOM 12)

11
2.2.2 I/F box IC-312 (for FELCOM 12)
FELCOM 12 is connected to the SSAS Alert Unit via the I/F Box IC-312.
For detailed wiring refer to the interconnection diagram at the back of this manual.
15 mm 40 mm
Cut and tape
unused wires
to prevent short.
CO-SPEVV-SB-C 0.2X5P
or TTYCS-4
Twist shield.
Clamp for cable
TTYCS-4 (or equivalent)
Clamp for cable
CO-SPEVV-SB-C 0.2X5P
Conductor
S = 0.75 mm
φ = 1.11 mm
2
Armor
Shield
Sheath
Sectional view of cable TTYCS-4
16P0231
12345
6
Cable from
SSAS Alert Unit
Communication Unit
(rear view)
17JE-573-10 Harness (5 m)
24 VDC
MJ-A3SPF0016-035 (3.5 m)
BUZZER DMC2DMC1 ANT BREAKER 24VDC
DTE 1 DTE 2 DATA
NMEA
OR
Wiring I/F box IC-312