DP-6
D2-6
3.3 Manual Reception (F3-6)
Selects communication mode for reception.
1. Press Function key [F3] and then the [6] key.
2. Select receive mode: “AUTO”. (Default)
3. Press the [Enter] key. The reception mode: AUTO appears on the screen.
Note)
*AUTO mode : Automatic operation in ARQ and FEC.
ARQ mode : ARQ mode only.
FEC mode :FEC mode only
DIRC mode : Not use
3.4 Printer and Language setting
Press [F1] while pressing [Fn] keys. The “Set up” will appear on the screen.
Default Setting)
Printer: PP-510
Language: Normal
When you change the Printer or Language setting, enter “unlocking” code in upper case
letter: [D] [P] [6].
Manual Reception
AUTO ARQ FEC DIRC
Set up
Language Normal Norway Sweden UK
Printer PP-510 Other
To Next Page
Loading...
