Furuno FS-1562 - Inmarsat C; Section G1. FELCOM 10; Connection; System Settings

1. Connection
2. System settings
2.1 System setup: [F5]
1. Press [F5] to display the System menu.
2. Press [Enter] or [1] to display the System setup screen.
3. Necessary settings are as below. (DET installed only one)
*System Date YY-MM-DD
*Preferred NCS AUTO
*SES Operation Mode INMARSAT-C
Section G1. FELCOM 10
G1-1
FURUNO
24VDC
24VDC
AC
ANT
DMC
DTE2
DTE1
NMEA/CIF
NMEA/CIF
CONTROL
IC300
DMC-5
IC-100
IC-200
IC-301
Printer
PP-500
Printer
Key
Key board
EGC Printer (PP-505)
or 2nd Terminal
REMOTE B
REMOTE A
IC-500
GLL, RMA, RMB,
RMC, VTG, WPL
Distress
Alaert Unit
Receiver
Call Unit
RP
NMEA)
or
NC
NC
NC