DMC-5
F1-2
System Settings List
The default settings are shown in a screened call of each setting item.
Menu Setting Note
OFF NAVTEX
Receiver
[SETUP]
[1]
ON
ON or OFF
When installed in NAV bridge,
setting may OFF.
OFF
ON
2182kHz WR
[SETUP]
[2]
Monitor-OFF
OFF
2182kHz Watch keeping is not
required from Feb. 1999.
OFF
No.1
VHF DSC
[SETUP]
[4]
No.2
No.1
When VHF No.1out of order,
select VHF No.2.
OFF
J3E
H3E
MF/HF DSC
[SETUP]
[5]
F1B
J3E
Select class of emission for
distress communications.
OFF
EGC
SES+EGC
SES/EGC
[SETUP]
[6]
SES(EGC)
SES(EGC) FELCOM-10/11/12 connected.
Type
0 to 9
(Default:1)
The user may select receiver
alarm tone.
Alarm Tone
Selection
[SETUP]
[7]
Key click ON or OFF
Date & Time
[SELECT]
”TIME”
YY-MM-DD-U
TC
YY-MM-DD
-UTC
The UTC time used for Distress
alert message.
Note)
The UTC time when it was entered with the DMC-5 is given priority more than the
DSC-5/6/8VP and FM-8500/8700.
Condition of the UTC time setting from DMC-5 to DSC-5/6/8VP, following below.
*When the DMC-5 entered the UTC time
*When the DMC-5 counted 00:00.
*When the DMC-5 or DSC-5 turn on power.
*When the DMC-5 changed in NO.1 or No.2 VHF selection setup menu.
*When the DMC-5 set from OFF to ON in the MF/HF setup menu.
To Next Page
Loading...
