DMC-5
F1-4
EEROM clear
When select to EEROM, press the [ENT] key;
After about 15 second the power is automatically cut off.
Turn the power on again manually. Muse be system settings.
(Refer to section “2. System settings”)
Contents of S-RAM and EEROM
Item Purpose
RAM 1 Clears work area only in the S-RAMs.
RAM 2
Clears all contents of the S-RAMs
(incl. received messages and ship’s position data.)
EEROM
Clears all contents of the S-RAM and EEROM.
(Settings of combined equipment, etc. [SETUP] [1] and [7]
To Next Page
Loading...
