1. OPERATIONAL OVERVIEW
1-9
How to close a session
To manually close a session, select it with the TAB key. Rotate the ENTER knob to
select [QUIT] in the user options area then push the knob. The session icon disap-
pears from the tab area.
When there is no operation for specific time (see section 6.9), the inactive session is
automatically closed.
Processing when the number of session is maximum
A maximum of seven sessions can be displayed in the tab area. If a seventh session
starts, the following message appears on the screen. Press the CANCEL key to close
the message. Close a session to make space for the new session.
If the eighth session is for sending a distress alert, all sessions except that session
automatically close, and the session starts.
If the eighth session is for receiving DSC message, the lowest-priority session auto-
matically closes and the message appears.
[WAIT FOR ACK]
INDIVIDUAL MSG ELAPSED TIME : 00H05M24S
TO : 987654321
CAPTAIN_5075
COMM MODE : TELEPHONE
COMM FREQ : TX 2170.0 / RX 2170.0 kHz
ACTIVE INFO PRINT QUIT
TX 2177.0/ RX 2177.00 kHz
RT
NO ACTIVE
The icon disappears.
(Continued from
previous page)
To Next Page
Loading...
