Furuno FS-2575 - How to Delete Addresses; How to Create a DSC Message with Registered Address

6. MENU OPERATION
6-15
6.15.4 How to delete addresses
Open the [ADDRESS BOOK] screen then follow the applicable procedure below.
Individual address
1. Rotate the ENTER knob to select the address to delete then press the 4 key.
2. With [DELETE SELECTION] selected, push the ENTER knob.
3. Rotate the ENTER knob to select [Yes] then push the knob.
Address by type
1. Press the 6 key several times to select desired type.
2. Press the 4 key.
3. Rotate the ENTER knob to select [DELETE LIST] then push the knob.
4. Rotate the ENTER knob to select [Yes] then push the knob.
All addresses
1. Press the 4 key.
2. Rotate the ENTER knob to select [DELETE ALL LISTS] then push the knob.
3. Rotate the ENTER knob to select [Yes] then push the knob.
6.15.5 How to create a DSC message with registered address
1. Open the [ADDRESS BOOK] screen.
2. Rotate the ENTER knob to select the address to use.
3. Press the OTHER DSC MSG key to open the [COMPOSE MESSAGE] screen.
Press
the
OTHER
DSC
MSG
key.
N06 HNKYU
LIST
: 24 : 20
: 6