5. DSC GENERAL MESSAGE CALLING, RECEIVING
5-8
3. After you have completed communications, rotate the ENTER knob to select
[QUIT] in the user options area then push the knob.
• How to send unable acknowledge call
1. Rotate the ENTER knob to select [UNABLE] in the user options area then push
the knob.
2. With [REASON] selected, push the ENTER knob.
3. Rotate the ENTER knob to select the reason for unable then push the knob.
4. With [GO TO CALL] selected, push the ENTER knob to send unable acknowl-
edge call.
[ACKNOWLEDGED]
ELAPSED TIME:
INDIV ABLE ACK 00
H
00
M
31
S
TO :
987654321
CAPTAIN_2575
COMM MODE :
TELEPHONE
COMM FREQ :
TX 2170.0 /RX 2170.0
kHz
INFO PRINT HOLD QUIT
RESEND
TX 2170.0/ RX 2170.00 kHz
TX 2177.0/ RX 2177.00 kHz
COMPOSE MESSAGE
MSG TYPE : INDIVIDUAL ACK
TO : 987654321 CAPTAIN_2575
PRIORITY : ROUTINE
COMM MODE : UNABLE TO COMPLY
REASON : NO REASON
DSC FREQ : 2177.0 kHz
GO TO CALL
NO REASON
BUSY
EQUIP ERROR
CAN’T USE CH
CAN’T USE MODE
QUEUE INDICATION
STATION BARRED
OPERATOR ABSENT
TEMP. UNAVAILABLE
To Next Page
Loading...
