Furuno GP-30 - Safety Instructions for the Installer

ii
WARNING
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Do not install the equipment where it
may get wet from rain or water splash.
Water in the equipment can result in fire,
electrical shock or equipment damage.
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or equipment damage. The
voltage rating of the equipment appears
on the label above the power connector.
Do not open the cover unless totally
familiar with electrical circuits and
service manual.
Improper handling can result in electrical
shock.
CAUTION
Observe the following compass safe
distances:
Ground the equipment to
prevent mutual interference.
Display
unit
Standard Steering
0.9 m 0.7 m
Safety Instructions for the Installer