5. STARTING FOR DESTINATION
5-8
4) Press to shift the cursor to the Trial
Speed line.
5) Press
or to select AUTO or MAN.
Auto uses ship's average speed to
calculate time-to-go.
6) If you selected MAN, enter speed.
7) Press the NU/CU ENT key.
The range, bearing and time-to-go between
two points appear on the display. If data
entered is wrong or insufficient the buzzer
sounds and the message "Incomplete Data"
appears. If the data contains error, and all
nines appear as the calculation results.
8) Press the MENU ESC key.
To Next Page
Loading...
