Furuno LH-5000 - Page 12

LH-5000 Operator’s Manual
Installation
7
Make sure that every signal cable is firmly connected.
Step 5 Place the LH-5000 Loud Hailer in the hole and fix it with four
screws.
Step 6 Attach the microphone to the front microphone connector on the loud
hailer.
Step 7 Connect the power cord properly.
Step 8 Mount the frame.
1
Loud hailer
3
Cushion
2
Tapping screw (PA4.0 x 25)
\
\
Panel
Frame
Signal Cable
Power Cord
3
2
1