Need help?Do you have a question about the Furuno LS-6100 and is the answer not in the manual?
General| Display | 4.5" LCD |
|---|---|
| Frequency | 200 kHz |
| Power Output | 600 W |
| Power Supply | 12-24 VDC |
| Type | Fish Finder |
| Operating Temperature | -15°C to +55°C |
| Beam Angle | 12° |
Critical warnings for the operator to prevent hazards like shock or injury.
Precautions to prevent equipment damage or dangerous situations during operation.
Warnings for installers regarding electrical shock, water leakage, and proper cable usage.
Cautions for installers on transducer cable handling and compass interference.
Explains the function of each button and control on the display unit.
Explains how to navigate and operate the LS-6100's menu system.
How to record, output, and find waypoints.
Details the six types of alarms and how to activate and configure them.
Settings for language, units, display options, and data sources.
Settings for simulation, testing, memory, NMEA, and bottom level adjustments.
Guide to identify and resolve common operational issues.
How to run built-in diagnostic tests to check system components.
Instructions for installing thru-hull mount transducers, including location advice.
Guidance on installing transom mount transducers on boats.
Procedures for mounting transducers inside the hull.
Instructions for installing the optional triducer multisensor.
To Next Page
