2. WIRING
2-8
6. Remove the screw on the SW panel of the control panel to remove the SW panel
and fixing plate, referring to the figure below.
Note 1: When removing the SW panel and fixing plate, be sure not to drop the
fixing plate into the console.
Note 2: The SW panel is required for the flooded lead-acid battery.
7. Attach the 05P0607 board.
BATTERY
CHARGER
OFF
AUTO
SW PanelSW Panel
Control Panel (Front view) Control Panel (Rear view)
Removing the SW panel
Removing the fixing plate
Fixing Plate
Remove
this screw.
To Next Page
Loading...
