Furuno RC-1800T Installation Manual

i
SAFETY INSTRUCTIONS
The installer must read the applicable safety instructions before attempting to install the equipment.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
CAUTION
Prohibitive Action
Mandatory Action
WARNING
CAUTION
Use only the specified power cable.
Fire or damage to the equipment can
result if a different cable is used.
Use the correct fuse.
Use of a wrong fuse can result in
damage to the equipment.
Turn off the power at the mains
switchboard before beginning the
installation.
Fire, electrical shock or serious injury
can result if the power is left on or is
applied while the equipment is being
installed.
Handle copper plate carefully.
Sharp edges can cut fingers.
Ground the equipment to prevent
electrical shock and mutual
interference.
Observe the following safe compass
distances to prevent interference to a
magnetic compass:
Standard
compass
Steering
compass
4.75 m 3.15 m
RC-1800T

Furuno RC-1800T Specifications

General

Brand	Furuno
Model	RC-1800T
Category	Receiver
Language	English