i
SAFETY INSTRUCTIONS
WARNING
Turn off the power at the
switchboard before beginning the
installation.
Fire or electrical shock can result if the
power is left on.
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power
supply can cause fire or equipment
damage. The voltage rating of the
equipment appears on the label above
the power connector.
Do not open the cover unless totally
familiar with electrical circuits and
service manual.
Improper handling can result in
electrical shock.
CAUTION
Observe the following compass
safe distances to prevent
interference to a magnetic
compass:
Ground the equipment to
prevent mutual
interference.
Display
unit
Standard Steering
0.35 m 0.25 m
www.reelschematic.com
www.reelschematic.com
To Next Page
Loading...
