Furuno RD-30 - Selecting and Arranging Displays; Display Examples

3
1.2 Wiring
The figure below shows where to connect cables on the rear of the display
unit.
Black
Red
POWER
(12-24 VDC)
Ground
1A FUSE
(+ Line)
DISPLAY
UNIT
+
-
DISPLAY
UNIT
GPS
RECEIVER
Ground the equipment to
prevent mutual interference.
CAUTION
Figure 1-2 Wiring
Note: The fuse holder contains a spring which fixes the fuse. To prevent
detachment of the spring, which would cause loss of power, tie the
line as shown in Figure 1-3.
Fuse holder
+ line (red)
Tie here.
Figure 1-3 How to fix spring in fuse holder
www.reelschematic.com
www.reelschematic.com