Furuno SC-30 User Manual

1. MOUNTING
4
Separation distance from Inmarsat B antenna
CONDITION 3: Locate the SC-30 away from communication (VHF, etc.) antennas
Separate the SC-30 as far as possible from communication antennas.
CONDITION 4: Select a stable location, no resonance location by engine or waves
Install the SC-30 in a stable location. The SC-30 contains highly sensitive GPS and angular speed
sensors. Therefore, install it where shock, vibration, etc. are minimal.
More than 3 m
SC-30
Inmarsat B Antenna
㩷
No resonance
Diameter of mounting pipe
shall be at least 80 mm.
No resonance at mounting base
SC-30

Furuno SC-30 Specifications

General

Brand	Furuno
Model	SC-30
Category	Compass
Language	English