Furuno VR-3000 - Page 29

25
RS422 serial card
Active: x
Name: CONTROL RS422#1
Node id: 1
Number of channel: 8
Active: x
Name: RJB
Node id: 2
Number of channel: 8
RS422 serial channel
Active: x
Channel#: SI00
Channel id: UNDEFINED
Serial input data type: NMEA data
Antenna position: UNDEFINED
Source type: 0
Time out: 10 sec
Baud rate: 4800
Data bits: 8
Parity bit: 0
Stop bit: 1
NMEA Version: 8-IEC61162-1
Note:
Active: x
Channel#: SI0X
Channel id: UNDEFINED
Serial input data type: NMEA data
Source: UNDEFINED
Source type: 0
Time out: no timeout
Baud rate: 4800
Data bits: 8
Parity bit: 0
Stop bit: 1
NMEA Version: 8-IEC61162-1
Note: NO NOTES
Digital card
Active: x
Name: RJB
Node id: 1
Number of channels: 64
Digital channel
Active: x
Channel#: DCXX
Channel id: UNDEFINED
Source: UNDEFINED
Source type: 0
Type: Normal
Sample rate (Hz): 2 Hz Fixed
Note:
Digital channel Monitor
Channel id: DCXX
Source: UNDEFINED
Type: Normal
Inactive state: CLOSED
Active state: OPEN
Note:
Swap Active/Inactive values
Analog card
Active: x
Name: RJB
Node id: 1
Number of channels: 16
Analog channel
Active: x
Channel#: AN00
Channel id: UNDEFINED
Source: UNDEFINED
Source type: 0
Sample rate (Hz): 2 Hz Fixed
Analog calibration point 1: 0
Analog calibration point 2: 0
Note:
Channel Calibrated: No
Analog channel calibrate
Channel#: AN00
Source: UNDEFINED
Calibration point 1: Set1
Calibration point 2: Set2
Note:
NMEA Version
NMEA Version/IEC-61162-1->SI00:
NMEA Version/IEC-61162-1->SI01:
NMEA Version/IEC-61162-1->SI02:
NMEA Version/IEC-61162-1->SI03:
NMEA Version/IEC-61162-1->SI04:
NMEA Version/IEC-61162-1->SI05:
NMEA Version/IEC-61162-1->SI06:
NMEA Version/IEC-61162-1->SI07: