36
HTD - Heading/Track control data
$--HTD,A,x.x,a,a,a,x.x,x.x,x.x,x.x,x.x,x.x,x.x,a,A,A,A,x.x*hh<CR><LF>
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | +--- 18
| | | | | | | | | | | | | | | | +------ 17
| | | | | | | | | | | | | | | +--------- 16
| | | | | | | | | | | | | | +----------- 15
| | | | | | | | | | | | | +------------- 14
| | | | | | | | | | | | +--------------- 13
| | | | | | | | | | | +------------------ 12
| | | | | | | | | | +---------------------- 11
| | | | | | | | | +-------------------------- 10
| | | | | | | | +------------------------------ 9
| | | | | | | +---------------------------------- 8
| | | | | | +-------------------------------------- 7
| | | | | +------------------------------------------ 6
| | | | +--------------------------------------------- 5
| | | +----------------------------------------------- 4
| | +------------------------------------------------- 3
| +---------------------------------------------------- 2
+------------------------------------------------------- 1
1. Override, A = in use, V = not in use
2. Commanded rudder angle, degrees
3. Commanded rudder direction, L/R = port/starboard
4. Selected steering mode
5. Turn mode R = radius controlled
T = turn rate controlled
N = turn is not controlled
6. Commanded rudder limit, degrees(unsigned)
7. Commanded off-heading limit, degrees(unsigned)
8. Commanded radius of turn for heading changes, n.miles
9. Commanded rate of turn to heading changes, deg/min
10. Commanded heading-to-steer, degrees
11. Commanded off-track limit, n.miles(unsigned)
12. Commanded track, degrees
13. Heading reference in use, T/M
14. Rudder status A = within limits, V = limit reached or exceeded
15. Off-heading status A = within limits, V = limit reached or exceeded
16. Off-track status A = within limits, V = limit reached or exceeded
17. Vessel heading, degrees
18. Checksum
To Next Page
Loading...
