Furuno VR-5000 - VR-5000 Error Codes - Part 2

-3.4-
SYS 1 SYS 2 SYS 3 DCU OK Code Name
Y
ELLO
W
Y
ELLO
W
OFF RED 062
PRC_STATUS_STORAGE_LAST_BUFFER_NOT_SAVED
SYS 1 SYS 2 SYS 3 DCU OK Code Name
OFF GREEN GREEN RED
082
PRC_STATUS_RAP_MISSING
SYS 1 SYS 2 SYS 3 DCU OK Code Name
GREEN GREEN GREEN RED 086
PRC_STATUS_CONFIG_VDRDEFAULT_ERROR
SYS 1 SYS 2 SYS 3 DCU OK Code Name
RED GREEN GREEN RED 090
PRC_STATUS_CONFIG_INVALID_FLASH_HANDLE
SYS 1 SYS 2 SYS 3 DCU OK Code Name
Y
ELLO
W
GREEN GREEN RED 094
PRC_RECORDING_BACKUP_INACTIVE
SYS 1 SYS 2 SYS 3 DCU OK Code Name
OFF RED GREEN RED 098
PRC_RECORDING_DRU_INACTIVE
SYS 1 SYS 2 SYS 3 DCU OK Code Name
GREEN RED GREEN RED 102
PRC_STATUS_CONFIG_UNABLE_TO_SAVE
SYS 1 SYS 2 SYS 3 DCU OK Code Name
RED RED GREEN RED 106
PRC_STATUS_SYSTEM_STOPPED
Description:
Indicates SYSTEM_STOP - request has completed (system not collecting
data anymore)
Action:
Turn OFF POWER to power down or recycle POWER to restart
Description:
This LED-indication is displayed when VR-5000 could not save
configuration to the DRU/BACKUPDRIVE
Action:
1
.
Ch
ec
k
DRU
connec
t
e
d
.
2
.
BACKUPDRIVE
O
.
K
.
3
.
El
se ca
ll
f
or
maintenance.
Description:
Indicate that the DRU is inactive - not storing data
A
ction:
Investigate communication to DRU
Description:
Indicates that the Backup is inactive - not storing data
A
ction:
Investigate communication to Backup disc
Description:
This LED-indication is displayed when the CONFIG_area in the DRU is
corrupt/wrong/un-initialized. This should only happen during
installation/service and if using a DRU not initialized by the VR-5000 it is
connected to.
Action:
Cl
ear
CONFIG
_area an
d
res
t
ar
t
VR
-
5000
.
Thi
s w
ill
i
ns
t
a
ll
a
’d
e
f
au
lt’
minimum - Configuration.
Description:
This LED-indication is displayed when the built-in configuration in the VR-
5000 system-software fails to load into the DRU. It can be the firmware
itself or a problem with the DRU.
Description:
Remote Alarm Panel is Missing. Connection to R.A.P. is lost
A
ction:
Reconnect R.A.P.
Reconnect R.A.P.
Description:
This indicates a storage-problem with DRU/BACKUP.
Action:
Investigate LOG(if possible) or contact supplier for repair.