EasyManuals Logo

Fusion MS-IP700i User Manual

Fusion MS-IP700i
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
51
52
• TodisabletheCategorytuningmethod,presstheEncodertoselectAllchan-
nels. The SiriusXM Source Screen is displayed with the Tuning mode indicated
set to ‘Manual’.
4. Press the Menu key to exit the current menu or press and hold the Menu key to
close the menu completely.
Parental mode
Parental mode provides a way of preventing access channels marked by
SiriusXM as “Mature”or“Locked”.Youmustentera4-digitaccesscodetoenter
Parental mode. When in Parental mode you can also change the 4-digit
access code.
Note: The factory setting for the access code is 0000. You can reset the
access code to 0000 by pressing and holding down the Mute key for 15
seconds.
To enter Parental menu:
1. Press the Menu key.
2. TurnandthenpresstheEncodertoselectParental>Unlock.Thefollowingac-
cessscreenisdisplayedwiththefirstdigithighlighted:
Category
You can use the Category menu item to control which categories of
channelsareavailable(Rock,forexample)whenyouareusingtheCategorytuning
method(see“TuningMethods”onpage16.
To select a Category:
1. Press the Menu key.
2. TurnandthenpresstheEncodertoselectCategory.
3. Dooneofthefollowing:
• ToenabletheCategoryTuningmethod,turnandthenpresstheEncoderto
selecttherequiredcategoryname,“Rock”forexample:
The Sirius Source Screen is displayed with the
Tuning mode indicator set to ‘Category’.
• Thepadlockiconmeansthechannelislockedorconsidered
mature content. If you select this channel you will be asked to unlock
parent mode, if it is not already unlocked.
3. EntertheaccesscodebyturningtheEncodertochangethehighlighteddigit,
thenpresstheEncodertoselectthenextdigit.Whenyouhave
entered all four digits correctly, Parental mode is unlocked.
To change the Parental mode access code:
1. Press the Menu key.
2. TurnandthenpresstheEncodertoselectParental>Changecode.
Thefollowingaccessscreenisdisplayedwiththefirstdigithighlighted:
Padlock icon

Other manuals for Fusion MS-IP700i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fusion MS-IP700i and is the answer not in the manual?

Fusion MS-IP700i Specifications

General IconGeneral
BrandFusion
ModelMS-IP700i
CategoryMarine Audio
LanguageEnglish

Related product manuals