Fusion MS-IP700i User Manual

59
60
Problem Solution
iPod
Why does my FUSION
Head unit keep locking
up when connected to my
iPod/iPhone?
Ifyouareexperiencingsoftwarelock-upsoryourunitfreezes:
• ResettheHeadunitbypressingtheresetbuttoninside
the face plate.
• ResetyouriPod/iPhone(seeApplewebsitefrommodel-specific
information).Thisshouldresumenormaloperation.
• MakesureyouhavethelatestversionofiTunesandthelatest
operating software in your iPod/iPhone. It is important to update
software when Apple releases new versions. If you are connected
via a dock, ensure you are using the correct sleeve and the con-
nectiontotheHeadunitissecure.
Will my iPod/iPhone
connect to my FUSION
product if the battery is
flat?
No. It will take a number of minutes for the Apple product to get a
minimum level of charge before it can connect and become operational.
Please connect and wait for the unit to initialise.
SiriusXM message:
‘Subscription
Updated’
A SiriusXM message informing you that you have either been granted access to or
unsubscribed from various channels.
Formoreinformationaboutyoursubscription:
• Online:Gotowww.siriusxm.com/subscriptions
• Phone:Call1-866-635-2349
SiriusXM message:
‘Channel xx
Unsubscribed’
• ContactSiriusXMtoupdateyoursubscription.
• Online:Gotowww.siriusxm.com/subscriptions
• Phone:Call1-866-635-2349
My Apple Device has gone
into thermal protection
Caution:TheinternaldocktemperatureoftheMS-IP700iwillbeslightly
higher than the ambient temperature outside the head unit. Should your
Apple iPhone or iTouch shut down due to exceeding the operating temper-
aturepleasecarefullyremoveitfromtheMS-IP700iandallowittocool
down before using again. Using your Apple device in a low charged state
will increase the heat generated whilst it is charging. For more informa-
tion relating to this please follow the Apple support web site link below.
http://support.apple.com/kb/ht2101
My iPod/iPhone will not
connect to the Head unit
while in the dock.
IfyourHeadunitdisplays“NotConnected”whileusingiPodasinput
source:
• Checkthatyouareusingthecorrectsleevecombination.Ifyou
have the incorrect sleeve combination this could prevent the iPod
connector from mating correctly. It could also damage the con-
nector in the dock or your iPod/iPhone itself.
If you are uncertain which iPod model you have, go to
http://www.apple.com/support/togetthecorrectmodelinfor-
mation for your iPod and sleeve.
If you are still unable to connect once you know for certain you
havethecorrectiPod/iPhone–sleevecombination:
• Ensurethatyouhavethelatestversionofoperatingsoftware
installed in your iPod/iPhone and the latest iTunes version. To do
this, connect your iPod/iPhone to iTunes and it will check and, if
necessary, prompt you to download the latest version.
If you are still unable to connect once you have confirmed that you
havethelatestsoftwareoryouhaveupdatedyouriPod/iPhone:
• ResettheiPod/iPhone(seetheusermanualforyourApple
product)andalsoresettheHeadunit(seeFUSIONusermanual).
Ifyouarestillunabletoconnect:
• ContactyourFUSIONdealerorcontactFUSIONviathetechemail
on the FUSION website.
Problem Solution
WirelessRemoteAppforiPadandiPhone
My FUSION-
Link Wireless
application
displays “No
stereo available”
The first thing to check is that you are connected to the correct wireless
networkforthe700Series.OnceyouhaveconfirmedthisclosetheAppon
the device and restart it (consult the manufacturers website for instructions
onrestarting).IfthisfailscheckthatyouhaveavalidIPaddressonthe700
Series and follow the instructions in the below tech support item
My FUSION-Link
Wireless remote
aplication wil not
connect to my 700
Series stereo
Thefirstthingtocheckisthatthe700SeriesisdisplayingavalidIPaddress
on the about screen. Select the settings menu then about to confirm. If the
displayis“IPNone“therouteriseithernotacompatibleDHCPproductornot
configured correctly. If the IP address starts with the prefix 169. it is not valid,
thisisadefaultaddresswhentherouterisnotsendingaDHCPgeneratedIP
addressorisconfiguredincorrectly.PleasereviewtheRouter’sinstruction
manual or contact the manufacturers website for technical help.

Fusion MS-IP700i Specifications

General

Brand	Fusion
Model	MS-IP700i
Category	Marine Audio
Language	English