Stereo Controls
Dial
Turn to adjust the volume.
Press to switch between zones to control the volume.
Turn to move through the menus or adjust a setting.
Press to select the highlighted option.
Press to open a menu.
Press to return to the previous screen or menu.
Press to change the source.
Press repeatedly to scroll through the available sources.
Press to turn on the stereo.
Press to mute and un-mute the stereo.
Press and hold to turn off the stereo.
BT source: Press to skip to the previous track or the beginning of the current track.
AM or FM source:
• Press to tune to the previous station or preset (preset mode with two or more presets saved).
• Press and hold for faster tuning (manual mode only).
DAB source: Press to return to the previous DAB station in the ensemble. When you reach the
beginning of the current ensemble, the stereo automatically changes to the last available station in
the previous ensemble.
On the AUX source, select to decrease the gain for the connected source.
BT source: Press to pause or resume.
AM or FM source:
• Press to cycle through the tuning modes (auto or manual) and presets (when two or more presets
are saved).
• Press and hold to save this station as a preset.
DAB source: press to scan for DAB stations.
BT source: Press to skip to the next track.
AM or FM source:
• Press to tune to the next station or preset (preset mode with two or more presets saved).
• Press and hold for faster tuning (manual mode only).
DAB source: press to advance to the next DAB station in the ensemble. When you reach the end of
the current ensemble, the stereo automatically changes to the first available station in the next
ensemble.
On the AUX source, press to increase the gain for the connected source.
Using the Dial to Select Items
You can use the dial to highlight and select items on the screen.
• Turn the dial to highlight an item on the screen.
• Press the dial to select the highlighted option.
2 Getting Started
To Next Page
Loading...
Need help?
General
