EasyManuals Logo

Fusion MS-RA60 User Manual

Fusion MS-RA60
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Radio
To listen to AM or FM radio, you must have a suitable marine AM/FM antenna properly connected to the stereo
and be within range of a broadcasting station. For instructions on connecting an AM/FM antenna, see the
stereo installation instructions.
To listen to DAB stations, you must have the appropriate equipment (DAB Playback, page 6). For
instructions on connecting a DAB adapter and antenna, see the installation instructions provided with your
adapter and antenna.
Setting the Tuner Region
You must select the region you are in to receive AM and FM stations properly.
You must select the region you are in to receive DAB stations properly.
NOTE: DAB stations are not available in all regions.
1 Select > SETTINGS.
2 Select TUNER REGION.
3 Select the region you are in.
Changing the Radio Station
1 Select an applicable source, such as FM.
2 Select repeatedly to move through the tuning modes, and select an option:
Select AUTO to scan and stop on the next available station.
Select MANUAL to select a station manually.
Select PRESET to select a saved station preset.
3 Select or to tune to the station.
When in MANUAL tuning mode, you can hold or to quickly advance through the stations.
Presets
You can save your favorite AM stations and FM stations as presets for easy access.
You can save your favorite DAB stations if the stereo is connected to the proper DAB equipment and set to the
correct tuner region. (DAB Playback, page 6)
Saving a Station as a Preset
1 With an applicable source selected, tune the stereo to a station.
2 Select > PRESETS.
3 Select SAVE CURRENT.
TIP: You can quickly save the selected station as a preset by holding .
Selecting a Preset from a List
Before you can select a preset from a list, you must save at least one station as a preset.
1 Select the applicable source.
2 Select > PRESETS.
3 Select a preset from the list.
Removing Presets
1 With an applicable source selected, select > PRESETS > REMOVE PRESET.
2 Select an option:
To remove one preset, select the preset.
To remote all presets, select REMOVE ALL PRESETS.
Radio 5

Other manuals for Fusion MS-RA60

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fusion MS-RA60 and is the answer not in the manual?

Fusion MS-RA60 Specifications

General IconGeneral
BluetoothYes
AM/FM RadioYes
Zone Control2 Zones
DAB+ RadioNo
NMEA 2000Yes
Channels4
Impedance4 Ohms
Display2.3" LCD
USB PortYes
Water ResistanceIPX6
Operating Voltage10.8 - 16 V DC
Frequency Response20 Hz - 20 kHz