BED LEVELING SCREEN
This screen shows you the last bed
level results and also gives you access
to bed leveling functions. All of these
functions are covered in more detail in
our bed leveling section.
1. Run the auto level sequence to
quickly probe the bed and see
the result in the section below.
2. Run the manual bed leveling
macro
3. Run the nozzle offset macro
TEMPERATURE CHART
SCREEN
This screen is rarely needed in normal
operation. However it can be very
useful to diagnose heater or
temperature sensor malfunctions.
This screen plots the temperature of
the bed and print head over time.
To Next Page
Loading...
