66
)XQFWLRQVRI/LQNDJH0HQX!
0
SHZLOOEHXVHGDVDQ
example to describe mixing rate setting. The mixing
XVH
IIHUHQW
KRZHYHUWKHVHWWLQ
6HWWKHWKURWWOHVWLFNWRWKHSUHVHWQHXWUDOSRLQW$G
HURGVRWKDWWKHVZDVKSODWHLVKRUL]RQWDO
KH571EXWWRQWRVZLWFKWRWKHGDWDLQSXWPRGH7RXFK
KH571EXWWRQWRHQGDGMXVWPHQWDQGUHWXUQWRWKHFXUVR
ust the AIL to PIT rate so there
ileron stick is moved to the left and ri
ust the ELE to AIL and ELE to PIT rates so
ovement when the elevator stick is moved
the pitch operation [PIT to AIL][PIT
ust the PIT to AIL and PIT to ELE rates so
gh.
$GMXVWE\VFUROOLQJWKHWRXFKVHQVRU
QJV
/LQNDJHFRPSHQVDWLRQRYHUULGHVLQWHUIHUHQFHIURPWKH
HUDWLRQZLWKWKHHOHYDWRURUHOHYDWRUR
HUDWLRQ
ZLWKWKHDLOHURQDWFROOHFWLYH
0RYHWKHFXUVRUWRWKH
LWHP
RXZDQWWRVHWDQGWRXFKWKH571EXWWRQWRVZLWFK
to t
Set the throttle to the lowest
on [DIR.] as "-".
2. Compensatin
ust the elevator compensation amount
erence when the elevator st
mal.
3. Repeat steps 1 and 2 above, per
Move the cursor to the "SPEED"
ouch the RTN button to sw
ust the speed compensation amount
for minimum interference in the
Touch the RTN button to end ad