Thank you for purchasing a Futaba
®
8Usuper series digital proportional R/C system. This
system is extremely versatile and may be used by beginners and pros alike. In order for you
to make the best use of your system and to fly safely, please read this manual carefully. If
you have any difficulties while using your system, please consult the manual, your hobby
dealer, or Futaba.
This manual is not just a translation and has been carefully written to be as helpful to you, the
new owner, as possible. There are many pages of setup procedures, examples, and trimming
instructions. If you feel that any corrections or clarifications should be made, please jot them
down on a piece of paper and send them to the factory. Due to unforeseen changes in
production procedures, the information contained in this manual is subject to change without
notice.
1. This product may be used for model airplane or surface use if on the correct
frequency.
The product described in this manual is subject to regulations of the Ministry of
Radio/Telecommunications and is restricted under Japanese law to such purposes.
2. Exportation precautions
(a) When this product is exported from Japan, its use is to be approved by the Radio Law of the
country of destination.
(b) Use of this product with other than models may be restricted by Export and Trade Control
Regulations. An application for export approval must be submitted.
3. Modification, adjustment, and replacement of parts
Futaba is not responsible for unauthorized modification, adjustment, and replacement
of parts of this product.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
To Next Page
Loading...
