A
ILERON
G
YRO
B
ASIC
S
ETTING
39
(1) Start display
Use the mode [+] / [-] keys to
navigate the setting menus.
(2) Gyro direction
[default: Normal]
This parameter controls which direction the
CGY750 (roll axis) will compensate when the
helicopter rolls. Pick the helicopter up and roll
the helicopter to the right. The CGY750 should
compensate by adding left cyclic to the swash
plate. If the CGY750 compensates in the wrong
direction, then it will be necessary to reverse
the Compensation Direction setting by pressing
the [+] or [-] data key once.
Push MODE
+/– key
WARNING
Verify that the CGY750 compensates in the
correct direction before flight. If the compen-
sation direction is incorrect the model will roll
uncontrollably, at a very high rate.
To Next Page
Loading...
