A
ILERON
G
YRO
B
ASIC
S
ETTING
40
(4) Gyro working mode [default: CMT]
The available choices are CMT, Normal or
AVCS. The CMT mode will allow you to select
either AVCS or Normal mode by using the Aile-
ron Gain Channel. The Normal mode will always
OPERATEIN.ORMAL 2ATE -ODE AND !6#3WILL
always operate in AVCS Mode. Use the data [+]
or [-] key to select the desired working mode.
(3) Gyro gain [default:100%, ranges:0~120%]
The top line shows the Aileron Gyro Base Gain
and the bottom line shows the actual working
gain as set within the transmitter. If the Aileron
Gain Channel is set to [INH] within the CGY750
[S.Bus]->Basic setting menu, then the remote
transmitter gain adjustment is not available and
the actual working gain is set by using data [+]
or [-] keys within this parameter.
To Next Page
Loading...
