E
LEVATOR
G
YRO
B
ASIC
S
ETTING
41
(1) Start display
Use the mode [+] / [-] keys to
navigate the setting menus.
(2) Gyro direction
[default: Normal]
This parameter controls which direction the
CGY750 (pitch axis) will compensate when the
helicopter pitches forward or backward. Pick the
helicopter up and rotate the nose of the helicop-
ter downward. The CGY750 should compensate
by adding aft cyclic to the swash plate. If the
CGY750 compensates in the wrong direction,
then it will be necessary to reverse the Elevator
Compensation Direction setting by pressing the
[+] or [-] data key once.
Push MODE
+/– key
WARNING
Verify that the CGY750 compensates in the
correct direction before flight. If the compen-
sation direction is incorrect the model will flip
uncontrollably, at a very high rate.
To Next Page
Loading...
