RECEIVER FP-R129DP
• Extremely quick response, high resolution, and
high reliability are achieved with a newly-
developed, low voltage PCM decoder.
• RF amplifier and monolithic IF amp designed
for high sensitivity.
• Dual conversion
"1991"
design with ultra
narrow-band ceramic filter is immune to ad-
jacent band interference (cross modulation
interference, mutual modulation interference)
and spark noise.
• Fail Safe and Battery Fail Safe functions
provide greater safety and reliability.
•Servo Hold function eliminates "glitches"
during momentary signal losses or strong inter-
ference.
• Gold-plated connector pins provide positive
contact.
• DSC System: Operation of all servos is possible
without turning on the transmitter by connect-
ing the accessory cord directly to the C termi-
nal of the receiver.
SERVO FP-S9201
•High
torque
and high speed water-and dust-
•Fiberglass
reinforced PBT
(polybutylene
proof
servo
with
highest-quality
coreless
motor,
terephthalate)
molded
servo
case
is
mechanical-
Output torque 5 kg-cm (69.5 oz.-in.). Operat- ly strong and invulnerable to glow fuel.
ing speed 0.22 sec/60 . • Strong polyacetal resin, ultra precision servo
• New indirect drive potentiometer improves gears ensure smooth operation, positive neu-
vibration and shock resistance and neutral tral, and minimal backlash.
precision tremendously. • Fiberglass reinforced epoxy resin PC board
• Futaba custom 1C provides high starting with thru-the-hole plating improves reliability
torque, narrow dead band, and excellent against shock and vibration.
trackability. Neutral holding force is also im- • Seven special adjustable splined output arms.
proved substantially.
To Next Page
Loading...
Need help?
General
