To Next Page

T12K SOFTWARE UPDATE MANUAL

[Updating procedure]

1.microSDcardformat

1.YouwillfirstwanttoformatyourmicroSDcard

totheT12K.IfyouareusinganexistingmicroSD

card,anydatapreviouslysavedtoitwillbedeleted

duringthe"format".Wesuggestyoueithersave

thisdataonyourcomputerorpurchaseanewcard.

2.AfterinsertingthenewmicroSD

cardintothetransmitter,turn

onthepowerswitch.Youwill

seetheword"FORMAT"ifyou

havenotpreviouslyusedthis

cardinthetransmitter.

3.Pleaseselect"YES"andtouch

"RTN".

4.Thefollowingscreenis

displayedduringformatting.

5.Whentheformatiscompleted,

thefollowingscreenis

displayed.

6.Turnoffthepowerswitchand

removethemicroSDcardfrom

itsslot.

①Pushtoopen.

②Slideinthedirectionofthe

arrowonthebatterycover.

③microSDcardisinsertedinaslot

bydirectionofaﬁgure.

*Itisreleasableifacardispushedonceagain.

T12K:

-1-

1M23Z06202

FUTABA T12K Software Update Manual

Other manuals for FUTABA T12K