1M23Z07709
T16IZ SOFTWARE UPDATE CHANGES
V3.1
V2
V3
1. Compatible with Futaba ESC MC-980H/A, MC-9130H/A, MC-9200H/A
Supports the telemetry function of MC-980H/A, MC-9130H/A, and MC-9200H/A.
1. Fixed telemetry voice for Futaba ESC and Hobbywing ESC.
2. Fixed the problem that model copy fails.
2. Hobbywing ESC telemetry compatible
Supports the telemetry function installed in some Hobbywing ESCs.
1. Add GYA553 Airplane Gyro setting function. (Refer the T16IZ GYA553 Setting Manual)
2. Compatible with SCORPION ESC telemetry
Added support for SCORPION POWER SYSTEM ESC some models.
◆
Register the ESC with the transmitter. The registered ESC is displayed as "Futaba ESC".
◆
The registered ESC is displayed as "Hobbywing ESC".
* The current and capacity consumption display may vary depending on the usage conditions, so use it as a guide.
◆
ESC telemetry display screen
The ESC status is displayed. Alarm setting is also possible.
This software updates or alters the functions and features noted below. The instructions and information that follow are meant as a supplement to the original
instruction manual that accompanied the T16IZ transmitter. Please refer to the original instruction manual where applicable, but replace the steps indicated below with
these instructions. Please check to ensure that the update has been installed.
1) Select the System Menu.
2) Touch the [Information] button.
3) Confirm that the information in the display indicates the version numbers as noted above.
©FUTABA CORPORATION 2021, 06
3. GYA553 Addition of setting parameters
AIL / ELE / RUD holding power setting has been added to the setting parameters of GYA553.
Adjusted the gyro holding force of the aircraft in AVCS mode.
Decreasing the value weakens the holding power and makes
the operation feeling closer to the Normal mode.
For details on Hobbywing ESC telemetry
support, refer to the Hobbywing website.
*Only for sale in Japan
To Previous Page
Loading...
Need help?
General
