EasyManuals Logo

FUXTEC FX-PS152 User Manual

FUXTEC FX-PS152
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Original User Manual FUXTEC FX-PS152 / FX-PS162
17
the mixture table on the following page for the correct fuel/oil ratio. Shake the tank to
ensure complete mixing.
WARNING: Failure to lubricate the device eliminates the liability of the device
manufacturer.
Gasoline and oil must be mixed in the ratio 40:1.
Recommended fuel
It is recommended to use unleaded gasoline with an octane number of 90 # or higher to
reduce carbon deposition in the combustion chamber. Do not use old or dirty gasoline. Keep
the fuel tank dust-free and avoid water getting into the tank. Sometimes misfiring will
occur under usual overload.
If the backfiring is heard under average load, we recommend replacing the gasoline. If the
misfire is still present afterward, please contact an authorized workshop.
WARNING
Gasoline is highly flammable and can cause an explosion in case of sparks
Refuel only in well-ventilated rooms and allow the engine to cool down before filling.
Smoking and open fire, as well as any sparks, must be avoided during refueling
Do not overfill the tank (see figure max. level)
After refueling, check that the fuel filler cap is properly closed
Avoid any spillage of gasoline
Keep the device away from children
Gasoline with an ethanol content
The engine can be operated with E10 gasoline. However, do not use gasoline with
a higher ethanol content than 10 %.
Gasoline
Two-stroke engine oil
(40:1) Gasoline
Two-stroke engine oil
(40:1)
1 liter 0.025 liters 5 liters 0.125 liters
2 liters 0.050 liters 10 liters 0.250 liters
Fuel filler cap
max. filling level

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FUXTEC FX-PS152 and is the answer not in the manual?

FUXTEC FX-PS152 Specifications

General IconGeneral
TypeString trimmer
Head typeNylon line
Handle typeU-type handle
Engine power3 hp
Product colorBlack, Orange
Rotational speed7100 RPM
Number of strokes2
Fuel tank capacity1.2 L
Vibration emission9.661 m/s²
Automatic line feedYes
Engine displacement52 cm³
Sound pressure level99.5 dB
Cutting diameter (max)440 mm
Sound power level guaranteed113 dB
Sound power level uncertainty3 dB
Power sourceGasoline
Weight and Dimensions IconWeight and Dimensions
Weight7500 g

Related product manuals